產品詳情 //

產品性能測試：

Product performance test:

試驗項目 TEST ITEM	試驗方法 TEST CONDITION	試驗結果 TEST TRSULT
附著性 Crosshatch adhesion	1mm2方格100個，3M600膠紙測試 A grid of 100 square(1mm2).peeled with a pressure 3M600 tape	5B 5B
鉛筆硬度 Pencil hardness	GB6739	HB
耐磨耗性 Abrasion resistance	RCA磨耗試驗 RCA Abrasion test	≥50次 ≥50time
耐濕性 Humidity resistance	40℃×90%RH,240h	良好 Good
耐熱性 Heat resistance	60℃×120h	良好 Good
耐熱水性 Hot water resistance	60℃熱水中浸泡2h,進行附著力測試 Immersed in 60℃ water 2h,and crosshatch adhesion	良好 Good
耐手汗 Sweat resistance	D1N53 160標準 DIN53 160 standard	良好 Good
耐醇性 Alcohol resistance	乙醇（99.5%），500g/ cm2擦試，露底前的回數 99.5% alcohol ,W=9.8(lkgf) calculate rubbing times before film abrading	≥100回 ≥100time
耐侯200h， 人工加速化 Weatherability 200h artificial accelerated ageing	ASTM G53	表面無明顯變化 No apparent change occurs to the surface

測試條件：
Preparation of test panels
1. 噴涂底材：ABS
1. Substrates: ABS
2. 漆膜厚度：10～15 μm
2. Film thickness: 10～15 μm
3. 烘烤：放置5-10min，60℃×30min干燥，放置72小時后試驗
3. Baking condition：Placed in 5 to 10 min，60℃×20min drying stay for 72 hours before test.
4. 稀釋劑：蒸餾水
4. Thinner: Distilled water
注意事項：
Notes:
1. 涂料開罐后請充分攪拌至均勻方可使用。
1. Thoroughly mixed before use.
2. 成型時的脫膜劑及其它灰塵等附著物，請在涂裝前擦試干凈。
2. The substrate must be free from lubricant, smut and other dirt prior to application.
3. 視底材不同附著力也有不同，涂裝前充分確認漆膜性能。
3. Please confirm the ability of the paint film before application due to its different adhesion on varieties of substrates.
4. 與其他涂料重復涂裝時，可能發生龜裂，請先進行充分確認。
4. Please notices that crackling may occur when it coats with other panits.
5. 涂料在室溫下不開罐的貯存期為六個月。
5. Storage period of coating is six months in room temperature under tank sealing condition